138 research outputs found
Evaluation of persistent-mode operation in a superconducting MgB2 coil in solid nitrogen
We report the fabrication of a magnesium diboride (MgB2) coil and evaluate its persistent-mode operation in a system cooled by a cryocooler with solid nitrogen (SN2) as a cooling medium. The main purpose of SN2 was to increase enthalpy of the cold mass. For this work, an in situ processed carbon-doped MgB2 wire was used. The coil was wound on a stainless steel former in a single layer (22 turns), with an inner diameter of 109 mm and height of 20 mm without any insulation. The two ends of the coil were then joined to make a persistent-current switch to obtain the persistent-current mode. After a heat treatment, the whole coil was installed in the SN2 chamber. During operation, the resultant total circuit resistance was estimated to be \u3c7.4x10−14 Ω at 19.5 K±1.5 K, which meets the technical requirement for magnetic resonance imaging application
Energy loss enhancement of very intense proton beams in dense matter due to the beam-density effect
Thoroughly understanding the transport and energy loss of intense ion beams
in dense matter is essential for high-energy-density physics and inertial
confinement fusion. Here, we report a stopping power experiment with a
high-intensity laser-driven proton beam in cold, dense matter. The measured
energy loss is one order of magnitude higher than the expectation of individual
particle stopping models. We attribute this finding to the proximity of beam
ions to each other, which is usually insignificant for relatively-low-current
beams from classical accelerators. The ionization of the cold target by the
intense ion beam is important for the stopping power calculation and has been
considered using proper ionization cross section data. Final theoretical values
agree well with the experimental results. Additionally, we extend the stopping
power calculation for intense ion beams to plasma scenario based on Ohm's law.
Both the proximity- and the Ohmic effect can enhance the energy loss of intense
beams in dense matter, which are also summarized as the beam-density effect.
This finding is useful for the stopping power estimation of intense beams and
significant to fast ignition fusion driven by intense ion beams
Anomalous stopping of laser-accelerated intense proton beam in dense ionized matter
Ultrahigh-intensity lasers (10-10W/cm) have opened up new
perspectives in many fields of research and application [1-5]. By irradiating a
thin foil, an ultrahigh accelerating field (10 V/m) can be formed and
multi-MeV ions with unprecedentedly high intensity (10A/cm) in short
time scale (ps) are produced [6-14]. Such beams provide new options in
radiography [15], high-yield neutron sources [16], high-energy-density-matter
generation [17], and ion fast ignition [18,19]. An accurate understanding of
the nonlinear behavior of beam transport in matter is crucial for all these
applications. We report here the first experimental evidence of anomalous
stopping of a laser-generated high-current proton beam in well-characterized
dense ionized matter. The observed stopping power is one order of magnitude
higher than single-particle slowing-down theory predictions. We attribute this
phenomenon to collective effects where the intense beam drives an decelerating
electric field approaching 1GV/m in the dense ionized matter. This finding will
have considerable impact on the future path to inertial fusion energy.Comment: 8 pages, 4 figure
Evaluation of a solid nitrogen impregnated MgB2 racetrack coil
To develop powerful wind turbine generators using superconducting technology, high-performance superconducting racetrack coils are essential. Herein, we report an evaluation of a multifilamentary magnesium diboride (MgB2) conductor-based racetrack coil cooled and impregnated simultaneously by solid nitrogen (SN2). The coil was wound on a copper former with 13 mm winding width, an inner diameter of 124 mm at the curvature, and 130 mm length of the straight section. An in situ processed S-glass-insulated 36-filament MgB2 wire was wound on the former in two layers with 19.5 turns, and heat treated via the wind and react method without any epoxy resin. The coil was evaluated for critical temperature and transport critical current in the SN2 environment at different temperatures up to 31.3 K in self-field. The coil was able to carry 200 A transport current at 28.8 K in self-field. During coil charging and operation, SN2 effectively acted as an impregnation material. The test results demonstrate the viability to use MgB2 racetrack coil potentially with SN2 impregnation in advanced rotating machine applications
Target density effects on charge tansfer of laser-accelerated carbon ions in dense plasma
We report on charge state measurements of laser-accelerated carbon ions in
the energy range of several MeV penetrating a dense partially ionized plasma.
The plasma was generated by irradiation of a foam target with laser-induced
hohlraum radiation in the soft X-ray regime. We used the tri-cellulose acetate
(CHO) foam of 2 mg/cm density, and -mm interaction
length as target material. This kind of plasma is advantageous for
high-precision measurements, due to good uniformity and long lifetime compared
to the ion pulse length and the interaction duration. The plasma parameters
were diagnosed to be T=17 eV and n=4 10 cm.
The average charge states passing through the plasma were observed to be higher
than those predicted by the commonly-used semiempirical formula. Through
solving the rate equations, we attribute the enhancement to the target density
effects which will increase the ionization rates on one hand and reduce the
electron capture rates on the other hand. In previsous measurement with
partially ionized plasma from gas discharge and z-pinch to laser direct
irradiation, no target density effects were ever demonstrated. For the first
time, we were able to experimentally prove that target density effects start to
play a significant role in plasma near the critical density of Nd-Glass laser
radiation. The finding is important for heavy ion beam driven high energy
density physics and fast ignitions.Comment: 7 pages, 4 figures, 35 conference
- …